Saturday, 18 December 2010
YouTube - FLEX 1500 QRP working over 600 watt , good for work any dx
FLEX 1500 QRP working over 600 watt , good for work any dx
YouTube - Flex-1500 2 meter local noise
Noise that is apparent in the 2 meter band, repeating, and very strong. It rolls around a bit and also shifts in frequency over time.
YouTube - Quick intro to my Flex CI-V Interface
I've been working on taking the IF from my Icom 910 into my SDR Flex 1500. I've built a PIC interface to tune the Icom radio to the signal I select in the PowerSDR screen.
YouTube - Flex-1500 2.0.16 not working part 2 of 2
Here is the scoop: If you don't see two drivers under flexradio in the device manager- once you install 2.0.16, you'll need to do the driver batchfile repair posted on the flex site. Then you'll see both when you plug in the 1500. If you then get the non-moving screen in SDR, use the new Custom DLL on the site (last option in the troubleshooting guide there). This Dll patch is because of the Intel "5"-series chipset on your motherboard. Most new I-3/I-5/I-7 chip laptops use these Intel "5"series
YouTube - ircDDB gateway demonstration
This demonstration video shows how the ircDDB network is used to exchange D-Star callsign routing information between gateway systems on different networks. The VK5REX gateway is on the US Trust system and has the ircDDB client installed. The laptop is running the Jonathan Naylor G4KLX ircDDB Gateway software and the Dummy Repeater software in lieu of a "real" RF repeater.
Subscribe to:
Posts (Atom)
